PRODUCT

DATA SHEET

GLASS

COATING

PART #: AT-V5-50B/ 50R

DESCRIPTION

New fluorine based protection for glass. Provides extreme durability against abrasion of wiper blades. Its super hydrophobic effect to allow rain flowing off windscreen at speed as low as 60 km/h.

 

Effectively provides exceptional optical clarity by cutting glare at night and improves driver’s safety during rain. One application lasts up to 18 months.

PROPERTIES

- Super hydrophobic effects

- Resists wiper abrasion

- Improves visibility in rain
- Increases safety
- Reduces glare at night

- Long durability

- Perfect for windscreens

APPLICATION

Glass Coating is particularly suitable for front and rear windscreen with wiper abrasion.

TOOLS

Glass Coating can be applied with microfiber applicators or tack cloth.

TECHNICAL DATA  (V5B/ V5R)

Appearance: Colourless/ Light Blue

Base: Fluorine

Curing: Normal ambient temperature

Shelf Life: 12 months

Container Size: 50ml / 50ml

INSTRUCTIONS FOR USE

The product is for professional use and should be applied by approved applicators only. Test on a small area or apply a test coat before application.

APPLICATION OF V5 GLASS COATING (Base) + (Reactor)

Buff the glass surfaces thoroughly with Glass Compound (Cerium Oxide based) and make sure the surface is completely dry and free of oils.

 

Mix the V5 Glass Coating- Base(Green bottle) and V5 Glass Coating- Reactor(Blue bottle) with 1:1 ratio in a volume cup

 

Use 5ml+5ml for a windscreen; 15ml+15ml for whole car.

 

Wrap the applicator sponge with the white microfiber suede cloth that comes with the box or use applicator of your preference.

 

Use a syringe to pump in and out of product mixture on the applicator.

 

Wipe on entire windshield beginning on the driver’s side then passenger side. Apply one layer of product by working in horizontal (front and rear windscreen) movements in slow motion to ensure that product is carried through evenly.

 

Mixture of V5 Glass Coating is absorbed into the microscopic pores of glass instantly, instead of forming a layer on top of glass surface.

 

Wait approximately 15-20 minutes; wipe off completely using clean microfiber towels until all residue is removed.

 

**NOTE
V5 Glass Coating must be used within 30 minutes after mixing as it will lose its functionality after the chemical reaction periods. Finish all the mixture and do not re-use for next application. Do not expose to water within 4 hours. Do not turn on wipers for 24 hours for maximum durability.

INSTRUCTION VIDEO

EFFECTS & PERFORMANCE

Super Hydrophobic Effects

© 2019 AUTOTRIZ

Alle Rechte vorbehalten

Kundendienst

Telefon-Nr: +6011 5626 3898